Liquivision

To purchase a Liquivision X1 dive computer, please visit our order page and select your local dealer. If you do not see a dealer near your location, please contact us directly.

The Liquivision Fischer X-Link comes with a Fischer connector sealing cap, thumbscrews to secure it to the X1, and mineral oil.

The Liquivision Hardwired X-Link comes with 5 feet/1.5 metres of 6mm waterstop cable and thumbscrews to secure it to the X1.

The X-Link does not come with a multifunction Attachment and AC Adapter (however, you can purchase a Liquivision Charger Kit which includes these items), or a rebreather cable with male Fischer plug. For more information about the cable, please visit the X-Link page.

You can charge the X-Link two ways: 1) Stand alone re-charging, and 2) Mated re-charging. The advantage of stand-alone recharging is that it is quick and easy (no need to set up the X1 Dive Computer in any way). However, you will not know when charging is finished. The advantage of mated recharging is that some software packages can report to you the progress of the X-Link recharge sequence.

For stand-alone recharging:

Connecting:

1. First connect the Attachment to the X-Link using the thumbscrews
2. THEN connect the Attachment to the AC Adapter and to power

Disconnecting:

1. Disconnect the AC Adapter from the Attachment
2. THEN disconnect the Attachment from the X-Link

For mated re-charging:

Connecting:

1. FIRST wake up the X1 Dive Computer by taps or by wet finger contact.
   • If your software offers a menu for monitoring X-Link recharging, then enter that menu.
   • For V-Planner Live: X1 Settings -> Clocks, Calibrate -> CCR Calibrations
2. THEN connect the X-Link to the X1 Dive Computer using the thumbscrews.
3. THEN connect the Attachment to the X-Link by using thumb screws.
4. FINALLY, connect the Attachment to the AC Adapter and to power.

• Your X-Link should automatically start charging once the Attachment and AC Adapter are connected.
• If your software supports an X-Link recharge monitoring function, then the display will show a “charging status” – how it appears will depend on the 3rd party software you have installed on the X1 Dive Computer.
• Charging should take approximately 4 hours.

Disconnecting:

1. 5) First, disconnect the AC Adapter from the Attachment
2. 6) THEN disconnect the Attachment from the X-Link

For instructions on how to connect the Liquivision X-Link to your rebreather, please visit the CCR Connection page.

The Fischer X-Link may only be submerged to a maximum depth of 120 metres (393 feet). Any submersions or pressurizations beyond this depth will void the warranty.

The Hardwired X-Link may only be submerged to a maximum depth of 180 metres (591 feet). Any submersions or pressurizations beyond this depth will void the warranty.

If you purchase a Liquivision X-Link second hand, please obtain a copy of the original owner’s purchase receipt for warranty purposes. If you are unable to obtain a copy of the receipt, we will consider the warranty period to begin the day the Liquivision X-Link was purchased directly from us.

If you are having problems with your Liquivision X-Link, you may either contact the dealer from whom you purchased the X1, or contact us directly. When contacting us directly, please include the serial number of your X1 unit as well as a detailed description and/or picture of the problem. We are devoted to providing prompt customer service and will be in touch with you within 1 to 2 business days to resolve this issue. Please note, that in the event of repair or replacement, you may be asked to provide a receipt of purchase.

Glad to hear you are interested in carrying Liquivision Products! Please visit the Dealer Zone page for further information on joining the Liquivision Team.